Current Position:HOME PAGE > Press Center > Company News

Daily maintenance of heat transfer equipment

Release Time:2019-02-26 15:16:37Click Rate:

RSS SubscriptionBig Centre Little

What is the heat transfer equipment, how to maintain and maintain the daily heat transfer equipment, the following small series will introduce you one by one.

The heat transfer machine can heat all kinds of heat transfer on cotton, linen, chemical fiber and other fabrics, and can also perform heat treatment such as screen printing, glue, foaming, etc., and can also color color and portrait photos. Baked in porcelain plates and metal plates, it is especially suitable for making medals, commemorative cards, cultural shirts, etc. It is economical and practical, and has beautiful patterns. It is replacing traditional embroidery and screen printing, but the cost and effect are much lower than and better than the general embroidery and multi-color screen printing.

Daily maintenance and maintenance of heat transfer equipment:

1. Pressure: If the pressure is not enough or too large, adjust the pressure screw (located at the bottom of the aluminum plate), increase the pressure in the clockwise direction, and reduce the pressure in the counterclockwise direction.

2. Time: When the hot stamping time arrives and the buzzer does not ring or keep sounding, check whether the micro switch contact point in the tail box is moderate. If it is not suitable, adjust it to the appropriate position.

3. Temperature: Preheat for about 15 minutes. When the temperature reaches the set temperature, the heating indicator will be off, and hot stamping can be started. If the heating plate does not heat up for several minutes, please check the line.

Slow roasting: Place the desired hot stamping object, press down the pressure handle, turn on the power switch, the temperature starts to rise, when the temperature rises to the starting temperature, the buzzer sounds a short beep, press the execute button once, Until the buzzer emits a long tone, press the execute button once to end the hot stamping. When the object is removed, the temperature will automatically return to the initial temperature and will be in the quick-bake standby state.

Speed roasting: At the initial temperature state, place the object, press the pressure handle, take out the object, the temperature will automatically return to the starting temperature, and then be in the quick-bake standby state.

At a temperature lower than the initial temperature, the entire hot stamping process can be completed by pressing the execution button without waiting for the temperature to rise to the initial temperature, but no longer pauses and sings when the temperature rises past the initial temperature value.

When the temperature and time reach the set value, the machine will enter the automatic constant temperature state. When the countdown is completed, the buzzer will sound, then pull the straight pressure handle outward, and take out the printed items (please take care to avoid burns) and tear off the bottom paper. , the operation is completed (Tear the paper is to pay attention to the way to tear the paper, there are cold tear and hot tear)

Note: The heating pad of the baking cup machine can not be burned, but try to avoid the height of the baking cup.

A cup that is lower than the width of the baking mat, the same should not be a small cup

Partially stuffed into the baking mat to bake, if you want to bake a small portion of the cup

The case should be dealt with on the drawing.


Service Hotline

4006339983

Functions and features

WeChat Official Account